دسته‌ها
تجهیز تقویم آموزشی خط لوله دپارتمان در انتظار به حد نصاب رسیدن در حال ثبت نام گرایش مهندسی مهندسی فرایند

دوره طراحی خطوط لوله توسط نرم ‌افزار OLGA (Flow assurance)

اگر علاقمند هستيد از زمان برگزاري اين دوره مطلع شويد، فرم ثبت نام/پیش ثبت نام را تکمیل نمایید.

شناسنامه دوره

وضعیت دوره: پیش ثبت نام/رزرو
مدرس:مهندس امیر حسینی
مدت:18ساعت
شروع:اعلام می شود
پایان:اعلام می شود
برنامه برگزاری:پنج شنبه ها
14:00 الی 18:00
شهریه شخصی (ريال):اعلام می شود
شهریه سازمانی (ريال): اعلام می شود
کد:PR117
دپارتمان:مهندسی فرایند
گرایش:مهندسی
تجهیز:خط لوله
نوع دوره:تئوری، نرم افزاری
نحوه ارائه:آنلاین
کد وزارت نفت:63026

جزئیات دوره

پیش نیاز:

آشنایی مقدماتی با جریان سیالات دوفازی در لوله ها

شرح دوره:

OLGA is originally developed as a dynamic one dimensional modified three fluid model for multiphase hydrocarbon flow in pipelines and pipeline networks, with processing equipment included. OLGA is originally based on the computer program developed by IFE in 1983 for the Norwegian State Oil Company, Statoil. The dynamic capability of OLGA is its most brilliant feature. Multiphase flow is a dynamic phenomenon and should be modeled as such. This dramatically increases the range of applicability compared with steady state models. OLGA has full network capability, that is, it handles both diverging and converging networks. Complete topside process systems can therefore be simulated, e.g., a system where several flow lines are connected to one manifold, which is connected to parallel separators that have compressor trains, separator trains and water drains further downstream.

The general goals in this course is modeling of multiphase flow lines from oil and gas reservoirs and transferring of such fluids through pipelines to production units or platforms and from platforms to refineries that can be located on the shore via OLGA. During this course all relevant steady and transient studies will be covered and the different kind of using the results, trends and plots will be interpreted in order to obtain a really good approach for design and sizing of Pipelines.

هدف:

سرفصل ها:

  • Introduction in Multiphase Flow
  • Introduction to OLGA and PVTSIM
  • OLGA GUI Layout
  • Steady state Simulation
  • Multiphase Pipeline Sizing
  • Insulation Thickness Study
  • Flow regime in Multiphase flow
  • Slug Formation in Multiphase line
    • Terrain Slug (Severe Slugging)
    • Hydrodynamic Slug
  • Slug Mitigation in Pipeline
  • Slug tracking Module
  • Slug Volume Calculation and Slug Catcher/Separator Sizing
  • Parametric Study
  • Production Ramp-Up / Ramp Down
  • Pipeline Shut down / Cool Down / Start Up
  • Pigging
  • Packing/ Depacking
  • Turn down
  • PVTSIM software
    • Fluid Properties ( Phase Envelope, …)

مخاطبان:

کارشناسان فرایند

بسته آموزشی:

جزوات و مستندات مربوط به دوره به صورت الکترونیکی در اختیار شرکت کنندگان قرار خواهد گرفت.

گواهینامه:

دارد

سایر توضیحات:

نظرات شرکت کنندگان

این دوره تا کنون 6 بار توسط پترو دانش افزار برگزار شده است و میانگین رضایت 52 نفر شرکت کننده در این دوره ها 84 بوده است.

pr117 0446
pr117 0446
pr117-0013
pr117-0014
pr117-0064
pr117-0068
pr117-0274
pr117-0342
pr117-0425
previous arrow
next arrow

ب. ی کارشناس فرایند

استاد بسیار خوب تدریس نمودند و مفاهیم کلی را انتقال دادند.

م.ف کارشناس فرایند

از تقاط قوت دوره مدرس دوره آقای مهندس ارجمند بودند.

ا.ن کارشناس ارشد فرایند

یک دوره‌ی بی‌نقص و کامل. این دوره از نظر محتوا و کیفیت و همچنین پشتیبانی واقعا فرای انتظار بود. استاد گرانقدر جناب آقای مهندس ارجمند که واقعا جزو نخبگان و مهندسین توانمندی هستند که نظیر ندارند.
جناب آقای مهندس خرم، مدیر محترم مجموعه پترودانش‌افزار هم که سنگ تمام گذاشتند و به هرشکل ممکن پیگیری و پشتیبانی کردند.

ح.ص کارشناس ارشد فرایند

خیلی ممنون بابت زحمات برگزاری دوره. من یه دوره تو یکی دیگه از موسسات شرکت کردم. واقعا پشیمون بودم از وقت و هزینه ای که صرف کردم. ولی دو دوره که تو پترو دانش افزار بودم واقعا راضی هستم. از تسلط اساتید و باقی مسایل مربوطه.

ثبت نام / پیش ثبت نام

برای ثبت نام در این دوره کافیست ابتدا فرم زیر را تکمیل نمایید. برای کسب اطلاعات بیشتر در مورد نحوه و روال ثبت نام در دوره های آنلاین کلیک نمایید.